To Clean a Card Printer Jam in a Zebra P330i, please follow these instructions:

1.  Push the card thickness guage to the uppermost position.  This guage is located on the left side of the card feeder.  This will decrease the tension on the card and allow you to easily pull it out.  Remember to reset the guage back to its original position before continuing to print cards.

2.  To eject the card, open the printer properties menu.  Select the device settings tab and then select the tools menu. There are two card eject buttons.  One ejects the card from the card engine.  The other one ejects the card from the feeder and the print engine.

3.  Turn the printer off and then on again.  The card will automatically eject when the printer is turned back on.