Tag Archives: Evolis Tattoo

Evolis Tattoo2 – How to Install a Print Ribbon

To print custom printed cards with an Evolis Tattoo 2 printer from Evolis, a print ribbon needs to be installed in the printer. Following you will find a list of steps to install a print ribbon in the Evolis Tattoo 2 printer. You will also find the steps in an Evolis produced video illustrating ribbon installation.

1. Open the printer cover.
2. Take a new ribbon and insert it inside the printer making sure it is properly positioned.
3. Close the printer cover.

The printer ribbon will automatically synchronize itself for card printing.

If you are interested in information about the Evolis Tattoo 2 printer or other Evolis printers available, contact our ID card experts at 888-485-4696.

Evolis Tattoo 2 – How to Use the Output Hopper

The Evolis Tattoo 2 printer is shipped with a detachable card hopper that will receive printed cards. Evolis has provided a video displaying how the output hopper is attached to the printer for use.

The hopper will accept 15 standard 30 ml PVC cards. It is attached by carefully lifting the front of the printer and placing the output hopper in place as shown in the video.

If you are interested in information about the Evolis Tattoo 2 printer or other Evolis printers available, contact our ID card experts at 888-485-4696.