Category Archives: ID Printer Ribbons

Value of High-Quality Consumables for ID Card Printers

Always use high-quality consumables, purchased from authorized dealers in your ID card printer. These supplies provide the best life and results from your machine. Safe-Card ID Services is one such dealer, but there are lots out there; find a dealer you trust!

But I saw cheaper consumables online…

Less reputable dealers may offer cards and ribbons that are “compatible” with your printer but are not certified. While you may find that they offer these at a discount, these savings may be an illusion. Recently, a local client ruined multiple print-heads by using sub-standard cards. Not only was this an inconvenience that interrupted their card production, it was costly. Printer manufacturers’ warranties do not cover print-head damage from poor-quality or non-genuine consumables.

What problems might low-quality consumables have?

Poor-quality cards may have foreign objects (dirt, dust, hair, and plastic particles), irregular sizing and thickness, and jagged-cut edges. In the best-case scenario, using these cards will require more frequent printer cleaning (to remove those foreign objects!). The worst-case scenario results in physical damage to the printer, specifically the expensive print-head.

Poor-quality ribbons may not be compatible with RFID sensors or printer firmware updates, leading to “no ribbon” or “unknown ribbon” errors, thus preventing their use. Non-genuine ribbons are often made with sub-standard materials. Use of these materials can lead to low-quality images, rendering of colors inconsistently, and ribbons tearing and sticking to card surfaces, all of which can also cause damage to the print-head.

Why are high-quality consumables such a big deal?

All printer manufacturers stipulate that the use of non-branded or low-quality materials can void printer and print-head warranties. While great online deals can be tempting, it is important to make sure that the materials are of high quality–both to preserve your device warranty and to ensure the best possible output.

The bottom line: be sure to inspect materials before using them. A broken printer costs more to replace or repair than you could ever save with aftermarket or “gray-market” supplies. Find a trustworthy, authorized dealer for your printer consumables and rest assured that your printer investment will be protected.

Uh-Oh! Ribbon Not Recognized on Your Trusty Fargo Printer?

HID_Fargo_Ribbon_Insert2

Ribbon insert provided by HID, indicated the need for a firmware update.

Hopefully, many of you are staying on top of your firmware updates. If you aren’t and have a Fargo printer, today is the day to catch up. HID Fargo has updated the RFID chip in their 442xx print ribbons. As you may know, the RFID chip ensures that you have genuine HID/Fargo ribbons, which assures warranty coverage and proper functioning, plus enables automatic ribbon sensing and settings for those who may switch ribbons periodically. As a result of this change, if you have a Persona C30 or PersonaC30e, you may find that your printer does not immediately recognize your new 442xx ribbon, making the printer unusable until the proper device firmware is loaded.

If this is the case, you simply need to update your printer’s firmware. (If you like to get ahead of potential pitfalls, this is also a great process to undergo–it will help you stay on top of important updates in the future!) This can be done by using the Fargo Workbench Utility to download and install any new firmware, as well as any driver updates. These steps will help you make this update smoothly:

  • If it is not already loaded on your PC, download and install the Fargo Workbench Utility from the HID/Fargo website here: https://www.hidglobal.com/drivers/15325;
  • Ensure your Fargo printer is connected and powered on, and that you have a “live” internet connection, then start/run Fargo Workbench
  • In the upper-right of the application screen is a drop-down box where you can select the Fargo printer you wish to work with (if you have only one, it should be pre-selected);
  • Click on the “Update Manager” icon in the upper-left of your screen;
  • Click the link to “Check for Updates” just under the Update Manager icon. Workbench will automatically connect to the HID/Fargo servers, and report any needed updates to either the printer drivers or the firmware.
  • If any updates are found, click the appropriate button to first “Download”, then to “Apply” the discovered updates. If both driver and firmware updates are available, we recommend applying the driver update(s) first, and then the firmware update.
  • If no updates are available, then congratulate yourself for avoiding trouble before it found you!

If you have already installed the most recent firmware and your printer still does not recognize your ribbon, or if you have trouble with any of the above, please call one of our experts at +1 704.535.5200 or +1 888.485.4696 (US & Canada). We’re happy to help!

The Basics of Determining Which Type of Ribbon You Need

Let’s face it. There are a lot of options when you’re looking at printer ribbons. Sure, it can be pretty straightforward to determine whether you need a black monochrome (K) ribbon or a full color (YMCK) ribbon, but then you run into the Os, Ts, Fs, and other permutations of the color spectrum. This guide should help you sort through these options.

This is a great place for me to remind you, however, that you are always welcome to call us (toll-free: 1-888-485-4696) and have an expert walk you through this choice. Our first priority is getting you the equipment you need. For those of you who (like me) are a little averse to calling and would rather read, this (lengthy) one is for you:

Step 1: Determine what kind of printer you have. This is crucial to making sure that you get the right ribbon. These are even among the first questions we’ll ask you if you call!

a) The brand of the printer will determine the ribbon brand you need.
b) The model (i.e., Evolis Primacy) will determine what kinds of ribbons you can use.
c) If you have a single-side or dual-side printer, you will need ribbons that are compatible.
d) If you have a laminating module (if you have a Fargo DTC4500e with a laminating module you need different ribbons than if you have a Fargo DTC4500e without one!)

Step 2: Find out if you need ribbons that will print in multiple colors or just one. We have monochrome (one color!) ribbons available in a variety of different colors, so if you need something that you don’t see on our website, just call and we’ll help you out.

It may be tempting to order a full color ribbon “just in case” since black and other individual colors are included, but if all you need is a monochrome black ribbon, you’ll save yourself a lot of money if you just order the K or KO ribbon. In addition, if you are printing barcodes or QR codes, scanners will not consistently read black print that is derived from a combination of yellow, magenta, and cyan (YMC).

 

KO

Black Monochrome with Overlay Labeling

 

One more piece to consider in this step: on what color cards will you be printing? If you have bold or dark color cards, regular color or black ink will not be accurately rendered, so you want to look at a metallic monochrome such as silver, gold, or white-resin, to make sure that your content is clearly visible.

Step 3: Dual or single side printer. If you have a single side printer, you should steer clear of anything with a repeated color (YMCKK, YMCKOK, and YMCKTK are the most common). This extra K (black monochrome) indicates that your ribbon can print color on the front and monochrome black on the back in a single pass, which makes it perfect for most dual side printing. In our product descriptions, we’ve clearly indicated which ribbons can only be used for dual side printing to help you avoid this.

 

YMCKOK

Dual Side Full Color/Black Ribbon with Overlay Labeling

 

Luckily, for many folks, a YMCK(O/T) ribbon will work. While it looks like this will only print on one side, your dual side printer will simply use a second set of panels to print on both sides. What’s important to remember about this is that your dual side printer will only get half as many cards as the number of images indicated on the product page (because each side of the card counts as a different image).

**Reminder: If you’re printing a barcode on the back, make sure to set your print driver to only use the K panel when rendering full-black images on the back—barcode readers won’t consistently read the “composite” black mentioned above.**

 

YMCKO

Full Color Ribbon with Overlay Labeling

 

Step 4: Determine what method your printer uses to get the color onto the card. There are two common ones.

a) Direct-to-Card printing: This method transfers ink directly to the card. If you print in color, and don’t have a separate UV overlay that you’re applying, make sure to purchase a ribbon that includes an overlay (O) panel. The UV resistant overlays and varnishes protect the color images on your cards, which will otherwise fade in as little as a few days when exposed to direct sun.
b) Transfer printing: This method prints a reverse image on the underside of the film then fuses the film to the card, negating the need for the overlay panel included on many ribbons (the transfer-film IS the overlay too).
c) I know! I said two! But lamination isn’t a method of getting ink onto your cards. It does, however, provide protection for your image and also keeps you from needing a separate overlay panel on your ribbon cartridge. So if, for example, you’re using an HDP5000 with the laminating option, you can use just the YMCK ribbon, with the lamination layer serving as your UV shield.

This covers the basics of what you need to know to order ribbons for your card printers. If your business has more advanced needs (such as holographic film or fluorescing ribbons), please call to speak to one of our experts at 1-888-485-4696. If you have follow-up questions or would just like more information about a specific option, drop a note in the comments.